As an indispensable equipment in the catering industry, supermarkets, seafood, food factories, hotpot restaurants, buffets, chemical factories, and many other industries, how can the maintenance of ice slicers extend their service life?
Firstly, during the ice making process of the ice maker, the condenser plays a crucial role in heat dissipation and has a direct impact on the ice making effect. In order to ensure the normal operation of the ice maker, it is necessary to regularly clean it. It is recommended to clean the condenser of the air-cooled ice machine once every 3 months. If the working environment is poor, it is recommended to clean it once a month; It is generally recommended to clean the condenser of a water-cooled ice machine every 6 months. For poor working environments, it is recommended to clean it every 3 months. Large ice machines are generally equipped with cooling towers, and it is recommended to clean the cooling towers once a month.
Secondly, if the ice maker has not been used for a long time (usually more than 15 days) and the ambient temperature is below 5 ℃, and if the machine is a water-cooled condenser, the water inside the condenser should be drained to avoid frostbite. Before starting, carefully inspect all components of the ice maker and provide water.
In addition, it should also be noted that:
1. The water source cannot be cut off during equipment operation.
2. When switching the storage and refrigeration door, the action should be gentle and gentle, and the door should not be kicked or thrown.
3. Do not store any items around the storage refrigerator to avoid obstructing ventilation and deteriorating hygiene conditions.
When starting the machine for the first time or not in use for a long time, the compressor heater should be powered on for 3-5 hours before starting, and then the ice maker should be operated.
5. It is prohibited to expose the ice machine box to high air humidity for a long time without opening it. Excessive humidity may cause the PLC control system and touch screen circuit board to burn out.